Firex Cucimix UCBTE C V1 Series Скачать руководство пользователя страница 40

Страница: 40 / 80

01-UDBRG_V1-DIMU-00-EN

COOKING LAYOUT

14.3

MESSAGE COLUMN (L)

INFORMATION AND REQUESTS INDICATOR L COLUMN

buzzer

Light

Indicator

Icon

Description

Behaviour

Pan out of position (for
cooking)

Icon present when pan out of position

Pan movement not
allowed

Icon present only when you want to
perform a pan movement in an
unauthorised phase.

Request to completely
open the lid (for pan
movement)

Icon present only when you want to move
the pan and the lid is not completely open.

Request to turn the tap
(for pan movement)

Attn. alternate icon

Icon present only when you want to move
the pan and the tap is not completely
turned (towards the outside of the pan).

Request to turn the tap
(to fill pan with H2O)

Attn. alternate icon

Icon present only when you want to fill pan
with H2O and the tap is not completely
turned (towards the pan).

Not allowed to fill pan
with H2O

Icon present only when you want to fill pan
with H2O during an unauthorised phase.

Request to unlock the lid

(cooking not allowed)

Icon only present when the lid is closed
(locked in pressure mode) during NON-
pressure cooking.

Request to close and
block the lid (pressure
cooking)

Attn. animated icon

Icon only present when the lid is NOT
closed (locked in pressure mode) during
pressure cooking.

Do not open the lid

(pressurised pan!!)

Attn. alternate icon

Icon present when the machine is
pressurised.

Steam condensation -
Reduction in cooking
pressure

Icon present at the end of a pressure
cooking. Indicates that steam is being
condensed to reduce the pressure in the
cooking pan and allow the lid to be
opened.

End of pressure cooking.
It is possible to unlock
and open the lid

Icon present at the end of a pressure
cooking.

Содержание Cucimix UCBTE C V1 Series

















































































Результаты поиска

Содержание Cucimix UCBTE C V1 Series

Отзывы:

Firex Cucimix UCBTE C V1 Series, Инструкция по установке и эксплуатации, Страница: 40 / 80

Результаты поиска

Содержание Cucimix UCBTE C V1 Series

Отзывы: