Firetide HotPort 5020, Руководство по установке

Страница: 46 / 47

Weatherproof procedures
38
Mastic tape
2. Remove the sun shield because you must put tape around all of the
connector.
3. Ensure that the cable and connectors are clean. Clean off oil, water, grease,
and dirt before you continue.
4. Wrap a layer of electrical tape (sticky side out) over the arrestor to node
connector and wrap approximately 2.5 cm (1 inch) of cable. Overlap the tape
by 40% with each turn.
5. Repeat for the antenna cable to arrestor connection.