Firetide HotPoint 5200, Руководство по установке

Страница: 22 / 32

Outdoor device installation
16 HotPoint 5200 Access Point Hardware Installation Guide
2. Remove the hook attachment plate.
3. Attach two U-bolt assemblies around the mounting pole. The U-bolts are
large enough to accommodate large poles. The next figure is a top view of a
pole and mount plate and the hardware for one side of the U-bolt. Put the
hardware on both sides of the U-bolt.
Note:
If you install the access point to a small-diameter pole, you must either cut
the U-bolts to length or use four additional spacer nuts (not included).