FireRock FIREROCK RUMFORD, Руководство по установке, техническим характеристикам и эксплуатации

Страница: 27 / 48

27
Any metal chimney that carries a UL 103 compliance designation
may be used with your FireRock fireplace and chimney system.
A conversion adapter must be available from the metal chimney
manufacturer and all necessary components, including, but not
limited to, firestops, wall spacers, and insulating parts, must be
utilized as required by the manufacturer.
A firestop is required wherever a chimney passes between one
zone of a building to another (e.g., when passing through a ceiling
into an attic area). In each instance, there must be a sealed area
around the chimney to avoid creating a chaseway allowing a fire to
penetrate the attic or in between floors. Failing to include firestops
between floors may result in a fire or explosion, causing property
damage, personal injury, or loss of life.
Refer to the metal flue manufacturer for framing dimensions
and assembly instructions. FireRock does not manufacture
these components and therefore defers to the manufacturer’s
instructions.
All local building codes must be adhered to.
Refer to metal flue manufacturer for number of offsets, approved
chimney shrouds, clearance to combustibles and any other
information specific to that flue system.
This fireplace has not been tested for use with a chase above the
roof. If your design calls for a chase above the roofline, refer to
metal flue manufacturer’s installation instructions for approval,
clearance to combustibles, etc.
METAL CHIMNEY INSTALLATION
FIGURE 15