FireRock FIREROCK RUMFORD, Руководство по установке, техническим характеристикам и эксплуатации

Страница: 23 / 48

23
BRICK FLANGE
The FireRock Brick Flange (Figure 11.1) is a component that allows a true brick or stone veneer above the roofline (maximum 20
vertical feet of standard brick or equivalent).
Most local building codes do not allow masonry to be supported by combustible material. Our brick flange is designed to carry the
weight of a brick or stone veneer only where you see it. If applying a brick or stone veneer to the chimney block above the roofline,
a brick flange must be used.
This brick flange is installed in the chimney stack approximately 12” below the low side of the roof penetration (Figure 11.1).
The brick flange is cast with a male and female nesting mechanism to ensure a no-leak seal.
Maximum weight: 7,566 lbs.
FIGURE 11.1