10
User Manual for Firefly Wireless Microscope GT630 Version: 1.3
Charging Battery:
Duration:
The Wireless Firefly Microscope has a built-in high efficiency lithium battery that enables more than 3 hours
continuous operation.
Charging the Battery:
Through the mini-USB port at the rear of the microscope, the embedded battery can be charged with the
provided USB DC cable. The cable must be connected to the USB port of a PC or to the “USB Power
Adapter”, which can charge directly from a wall outlet.
Overload Protection:
The
overload protection circuit will prevent overcharging when the battery is full and the “Indicator” will
turn green.
Power Indication:
The
power indicator light is normally red during operation, but it will turn blue when the remaining battery
life is less than 30 minutes.
The lithium battery is a delicate and consumable item. It is expected to last through years of use
and is guaranteed for twelve months from its purchase against defects. If there is any battery
related issue, please contact customer service immediately. Battery replacement by
unauthorized personnel or replacement with unauthorized batteries may damage the system and voids the
overall warranty.
Channel Mapping:
On the rear right side of the microscope, there is a switch allowing users to set the
wireless channel. Both the receiver and microscope must be set to the same
channel for proper operation:
CH 1: Channel 1
CH 2: Channel 2
CH 3: Channel 3
CH 4: Channel 4
