FIREFRONT
This fire is supplied with a particular style of fire front. Use of the fire front will ensure an ade-
quate airflow under the firebox for the correct functioning of this appliance. Compliance with
safety standards cannot be guaranteed when another style of front is used.
CLEARANCES TO COMBUSTIBLES
A non-combustible shelf may be fitted to within 100mm of the top edge of the fire frame.
However the items placed on it must also be able to withstand high temperatures.
A combustible shelf may be fixed to the wall above the fire, providing that is complies with the
dimensions given below.
Combustible materials, such as wood, may be fitted to within 100mm (4in) of either side of the
frame of the appliance, providing the forward projection does not exceed 100mm (4in).
Any combustible sidewalls must be at least 500mm to the side of the radiant heat source.
As with all heating appliances any decorations soft furnishings and wall coverings (i.e. flock,
blown vinyl and embossed paper) positioned too close to the appliance may discolour or scorch.
VENTILATION AND ROOM SIZE
Purpose provided ventilation of 100cm
2
is required for this appliance. An openable window or
louvre is also required.
Any ventilation fitted must comply with BS 5871 part 2 and BS 5440 part 2. Ventilation fitted
under, or within immediate vicinity of the appliance must not be used as it may adversely effect
performance of the combustion monitoring system (ODS) system.
The requirements of other appliances operating in the space or room must be taken into con-
sideration when assessing ventilation requirements, this will have been carried out by your
CORGI registered installer.
A supply of fresh air into the room is advisable to maintain temperatures within limits.
The appliance MUST NOT be installed in a bedroom, bathroom or any sleeping area.
For Republic of Ireland, see relevant rules in force.
The room size should be a minimum of 30m
3
to allow adequate circulation of air and ensure the
correct operation of the fire. This volume may include adjacent spaces, but these spaces must
not be separated by a door.
OPERATING INSTRUCTIONS
The pilot is visible through the left hand side of the matrix.
Push in and turn the control knob to the SPARK position, and hold there for
a few seconds.
Continue turning anti-clockwise through the spark click to the PILOT light
position, ensuring the pilot has lit. If not, return the knob clockwise, and
repeat.
When the pilot lights after the spark, keep the knob depressed for approxi-
mately ten seconds. Now release the knob and the pilot should stay alight. If the pilot extin-
guishes during use, wait three minutes before repeating the ignition procedure. To achieve the
HIGH setting, push the control knob in slightly and continue turning anti-clockwise to the high
position. The main burner should light after a few seconds. To decrease the setting to LOW, turn
the control knob clockwise to the low setting.
2
2.0
3.0
4.0
5.0
Maximum depth of shelf
Minimum distance from hearth to underside of shelf
180mm
850mm
100mm
790mm
Содержание P30G FXL01
Страница 2: ...FXL01...
