16 |
P a g e
Pairing
Pairing creates a connection between the Wireless Base Station and the
headset. This is only required once. After pairing, Headsets will connect
automatically.
Full-Duplex Pairing
1.
Press and hold the desired pairing button until its link indicator begins to
flash slowly. Any previous pairing to that position will be forgotten.
2.
Place the Firecom headset into pairing mode by pressing the right PTT
button and the power button until you hear "base station registering".
3.
The Base Station will automatically connect, showing a solid link led.
4.
If the pairing was unsuccessful, repeat all steps above.
Broadcast Only Pairing
Broadcast Only allows up to 100 devices to be paired to the Wireless Base
Station. One active full duplex device pairing must exist for the Broadcast
channel to be opened. Broadcast users never have Radio Transmit capability.
Example: Position 1 has a Full Duplex headset pairing. Positions 2-4 are
available for devices to share. Position 5 broadcasts back to the group.
1.
Press and hold Buttons 4 & 5 until 4 & 5 link LEDs begin to flash slowly.
2.
Place the wireless device you wish to link into pairing mode.
3.
The wireless base will automatically connect, showing a solid link LED on
position 5 and the device will show that it is connected (refer to the
Firecom device manual).
4.
If the pairing was unsuccessful, repeat steps 1-3.
5.
To pair additional devices, repeat steps 1-4 with another device.
Because Broadcast Only Headsets share communication positions, there can be
slight delays in communication. To talk, the Push-To-Talk button must be held
until a position opens. After a Broadcast call is made, there will be a pause in
which incoming communications cannot be heard
