21 |
P a g e
Important Safety Information
CAUTION! Follow all warnings and instructions marked on the product or
contained in the owner’s manual.
When using this product, always follow basic safety precautions to reduce the
risk of fire, electric shock and injury to persons, including the following:
Do not use the wireless system to report a gas leak in the vicinity of the
leak.
Use only the power adapters, and power cords indicated in the manual. If
more than one type of power adapter is included in the product, the
manual specifies which adapter should be used for each component. Be
sure to use the proper adapter for each product component.
Do not place the power cord where it creates a trip hazard or where it
could become chafed and create a fire or electrical hazard.
Do not subject the unit to high temperatures or leave it in direct sunlight
for an extended period of time.
SAVE THESE INSTRUCTIONS!
Warning for Sensitive Electronic Devices
This equipment and any radio-based electronics can potentially cause
electromagnetic interference with other equipment and can be interfered with
by other equipment. This also applies with DECT based equipment. Due to the
very low transmission power associated with DECT, the chance for interference
is small. However some specific precautions must be taken into account for
sensitive electronic equipment e.g. sensitive laboratory equipment, medical
instruments or medical implants to avoid incidental influence of equipment
operated in straight nearness to sensitive electronic equipment. You are
therefore advised not to place the DECT equipment or its antenna in close
proximity to sensitive equipment by maintaining a 20cm minimum distance
between the sensitive equipment even in standby mode. Please also consider
referencing the documentation provided by us and the manufacturer of
sensitive electronic items guiding its proper usage.
General Communication Privacy Notice
Although this equipment may contain specific protocols that enhance security
and privacy of communication, privacy of communication may not be ensured
when using this equipment.
