FireBrick FB6602, Руководство пользователя

Страница: 29 / 152

Configuration
14
Figure 3.4. The "Setup" category
Each section is displayed as a tabulated list showing any existing objects of the associated type. Each row of
the table corresponds with one object, and a subset (typically those of most interest at a glance) of the object's
attributes are shown in the columns - the column heading shows the attribute name. If no objects of that type
exist, there will be a single row with an "Add" link. Where the order of the objects matter, there will be an 'Add'
link against each object - clicking an 'Add' link for a particular object will insert a new object before it. To add
a new object after the last existing one, click on the 'Add' link on the bottom (or only) row of the table.
Tip
If there is no 'Add' link present, then this means there can only exist one object of that type, and such
an object already exists. The existing object may have originated from the factory reset configuration.
You can 'push-down' into the hierarchy by clicking the 'Edit' link in a table row. This takes you to a page
to edit that specific object. The page also shows any child objects of the object being edited, using the same
horizontal-line delimited section style used in the top-level categories. You can navigate back up the hierarchy
using various methods - see Section 3.4.3.
3.4.2.2. Object settings
The details of an object are displayed as a matrix of boxes, one for each attribute associated with that object
type. Figure 3.5 shows an example for an
interface
object (covered in Chapter 6) :-
Figure 3.5. Editing an "Interface" object
By default, more advanced or less frequently used attributes are hidden - if this applies to the object being
edited, you will see the text shown in Figure 3.6. The hidden attributes can be displayed by clicking on the
link "Show all".