
Supported RADIUS Attribute/
Value Pairs for L2TP operation
85
User-Name
1 Username from authentication (PAP/CHAP) or proxy authentication received
on L2TP or received in authentication response
Class
25 From authentication response if present
Chargeable-User-
Identity
89 Graph name that applies, sanitised to comply with CQM graph name rules..
Called-Station-Id
30 Called number as received on L2TP
Calling-Station-Id
31 Calling number as received on L2TP
Service-Type
6 Framed
Framed-Protocol
7 PPP
Framed-MTU
12 Final MTU being used for session
Filter-Id
11 Filters in use
Session-Timeout
27 Absolute limit on session, in seconds, if specified in authentication reply
Framed-Interface-ID
96 Peer IPv6 Interface ID from PPP IPV6CP
Framed-IP-Address
8 Peer IPv4 address negotiated in PPP (normally from authentication response)
Connect-Info
77 Text Tx speed/Rx speed in use
Acct-Delay-Time
41 Seconds since session started
Acct-Event-
Timestamp
55 Session start time (unix timestamp)
Acct-Session-Id
44 Unique ID for session
NAS-Identifier
32 Configured hostname of FireBrick
NAS-IP-Address
4 NAS IPv4 address if using IPv4
NAS-IPv6-Address
95 NAS IPv6 address if using IPv6
NAS-Port
5 L2TP session ID
Tunnel-Type
64 Present for relayed L2TP sessions, L2TP
Tunnel-Medium-Type
65 Present for relayed L2TP, 1 (IPv4) or 2 (IPv6)
Tunnel-Client-
Endpoint
66 Present for relayed L2TP, text IPv4 or IPv6 address of our address on the
outbound tunnel
Tunnel-Server-
Endpoint
67 Present for relayed L2TP, text IPv4 or IPv6 address of the far end address of
the outbound tunnel
Tunnel-Assignment-
ID
82 Present for relayed L2TP, text local L2TP tunnel ID
Tunnel-Client-Auth-
ID
90 Present for relayed L2TP, local end hostname quoted by outgoing tunnel
Tunnel-Server-Auth-
ID
91 Present for relayed L2TP, far end hostname quoted by outgoing tunnel
Note that most parameters are not included in interim and stop accounting records. The acct-session-id should
be used by accounting servers to correlate interim and stop records with the start record. The graph name could
be used, but is only available where there is a graph. If too many different graphs then that is not present. Some
exceptions apply as they can be changed by a change of authorisation RADIUS request, such as Connect-Info.
F.4. Accounting Interim
Table F.5. Accounting-Interim
AVP
No. Usage
Содержание FB6602
Страница 1: ...FireBrick FB6602 User Manual FB6000 Versatile Network Appliance...
Страница 2: ......
Страница 60: ...Profiles 45 profile name Off set false profile name On set true...