FireBird Enviroair 11kW, Руководство по установке и эксплуатации

Страница: 53 / 56

53
*Protection codes where if displayed, the unit will try and restart three times under this alarm code and on the third attempt the unit will stop.
Alarm
Code
Retry
stop*
Enviroair Origin Detail of Abnormality Main Factors
76 – 0 Indoor
Freeze Protection stop by indoor
liquid temperature thermistor
77 – 0
Indoor - Unit
Controller
Receiver Communication failure
No Opentherm / Hlink communication for
a continuous period of 10 minutes
78 – 0
Indoor - Unit
Controller
RF Communication failure
There is no communication for 1 hour with on or two
RF receivers which are bound to the RF-Bridge.
79 – 0 Indoor - Outdoor Unit Capacity setting error
There is no concordance between indoor outdoor
unit capacity
80 – 0
Indoor - Unit
Controller
Unit controller - H-link - RCS
transmission error (if no H-LINK,
RCS has no power)
No H-link communication for a continuous period of
1 minute between Indoor and Unit controller User control
by connection wiring (breaking, wiring error, etc.)
81 P81 0 Indoor
“Momentary Power interruption”
or “Low voltage detected”
83 P83 0 Indoor Hydraulic alarm pressure Water pressure is not detected in the hydraulic cycle
157 (0) Indoor
Inverter communication
abnormality thermistor
Described in inverter abnormal stop control
202 (0) Indoor Wrong settings of Controller
203 (0) Indoor
Slave PC-ARFHE stops answering to
Master Controller
Loose, disconnected, broken
or short-circuited connector
204 (0) Indoor
Indoor unit stops answering to
Master Controller
Loose, disconnected, broken
or short-circuited connector
NOTE
(0): Option configurable from Unit controller. This alarm will be displayed if the system has been configured.
0: Default. This alarm will be displayed in the Unit controller.
–: Not applicable.