Fiplex DHS37-R-DU, Руководство пользователя и инструкция по установке

Страница: 33 / 45

DHS37-R-DU 29

Digital Master frame. There are five sub-sections inside this frame:
o
Downlink filtering: this section contains fields to modify channel frequencies,
squelch options and filtering options. Parameters are described in following
table:
Parameter Range Description
Frequency Downlink band
Downlink frequency channels. Frequency
resolution is 3.125KHz
Channel enable Enabled / disabled Each of 12 channels can be enabled/disabled
Bw Filter
90KHz / 45KHz /
30KHz / 20KHz /
15KHz
Bandwidth of channels filter can be
independently adjusted (if filtering is enabled)
Fine Gain Adjust -5 to +5dB
If filtering is enabled, gain of each channel can
be fine adjusted
Power indicator ---
Level of each channel, measured according to
its bandwidth filter, is shown in dBm units. Led
indicator shows if levels exceeds squelch
threshold (green) or not (yellow).
Squelch enable
control
Enabled / disabled
Enabling this control, repeater does not transmit
in each channel if RF input power do not exceed
the threshold level configured according to next
row
Squelch threshold
control
-90dBm to 40dBm
If squelch is enabled, input levels below this
threshold are not transmitted.
Filtering enable Enabled / disabled
Filtering option can be bypassed. If filtering is
disabled, fine gain adjustments and squelch
options are ignored
o
Master RF Input parameters. Next table describes information of this frame:
Parameter Range Description
Broad band level ---
This indicator shows input level measured along
DL band