MACHINE CHARACTERISTICS AND TECHNICAL DATA
Ecosmall
Rev. 000
29/11/2017
7/41
2. MACHINE CHARACTERISTICS AND TECHNICAL DATA
2.1. MACHINE IDENTIFICATION
An adhesive machine identification label containin
g indelible “CE” marking details is affixed on the rear side
of the machine next to the handle.
The label must never be removed and should always be kept legible. If the label is
damaged a duplicate should be ordered. The machine may be sold without the label.
2.2. DESCRIPTION AND COMPONENTS
The scrubber machine Ecosmall has been designed to clean flat surfaces by means of washing followed by
washing water suction. The electric drive system is equipped with a set of batteries supplying power to the
brushes motor and to the suction motor.
The machine can be equipped with either two brushes or one brush which can be operated to scrub the floor
with water and detergent. When the machine moves forwards, the squeegee or back brush, in contact with
the floor, takes up any water by suction for its subsequent delivery to the recovery tank.
Through the control panel, all the main machine functions can be activated. In particular, it is possible to:
Adjust the forward movement speed via the special potentiometer;
Select the forward or backward movement direction;
Display the battery charge;
Activate brush rotation (controlled simultaneously with machine movement);
Start vacuum suction;
Turn the machine on and off.
The main components of the machine are:
FIGURE N. 2.1
