START-UP AND OPERATION INSTRUCTIONS
Ecosmall
Rev. 000
29/11/2017
26/41
4.7.6 BRUSHES REPLACEMENT
Proceed as follows to replace the scrubbing brushes (figure 4.12):
Remove the key from the control panel to prevent unwanted ignition;
Release the brush by turning it clockwise (fig. 4.12 detail 1) and then remove it (fig. 4.12 detail 2);
To insert a new brush, position it under the flange (fig. 4.12 detail 3) and then lift it until it is inserted
in the flange and rotate it clockwise.
FIGURE N. 4.12
FIGURE N. 4.11
1
2
3
