2
3
BEFORE INSTALLING YOUR FIORE ™ OvEN
PLEASE READ THE COMPLETE MANUAL CAREFULLY
Intended for Domestic Kitchen Use Only
IMPORTANT:
Prior to installation please inspect your Fiore™ product. Please report any damage of the product to your local
vendor before installation. Any claims for damage visible or hidden must be made immediately in order for the
carrier to assume full responsibility and absorb any associated costs. If damage or defect is discovered DO NOT
INSTALL your Fiore product. Any claimed damage or defect to the finish of the product after the product has
been installed will be excluded from any manufacturer warranty.
ATTENTION:
1.
All electrical and installation work must be done by a licensed contractor who is familiar with all applicable
building codes and standards in your region.
2.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified
person to avoid a hazard. Any modifications that may be required to the electrical system for the installation must
only be made by qualified electricians.
3.
Be sure to SHUT-OFF MAIN BREAKER PANEL before servicing or cleaning the range hood unit.
4.
Use your Fiore freestanding range only for its intended purpose. The manufacturer disclaims all liability for any
other use of the appliance.
5.
Please see installation diagram for minimum dimension requirements.
6.
Pay close attention to existing electrical wiring and other non-visible rough utilities when cutting or drilling into
wall or ceiling.
9.
This unit must be grounded.
