71-0163
Page 6
4215-138
Rev. 01
09/07/2021
8.
Install top plates to the corresponding wall panels on front
and back sides with the notched ends facing up. Install the
left and right-side top plates so they fit into the notches.
Note: Before installing top plates, ensure all panels are
connected together on top and on the corners.
9.
Secure top plates using the 2” Torq screws. Install one screw in each corner and one
screw in the center of each wall.
10.
Install corner caps to each corresponding wall panel and secure with Brad nails or finishing nails (not
supplied).
Note: Some woods will twist, which is normal, so installation can be more difficult. See end of manual
for suggestions on how to install a twisted corner cap.
