background image

Finn Corporation Commercial Limited Warranty

Effective August 23, 2010

OUR WARRANTY TO YOU:

Finn  Corporation  warrants  to  you,  the  original  purchaser,  for  use 
(or  rental  to  others  for  use)  all  new  construction  machinery,  parts 
and attachments (except those referred to herein) that are manufac-
tured by Finn to be free from defects in material and workmanship 
for a period of 12 months from date of purchase or 1200 hours of 
use, whichever comes first.  Replacement parts provided under the 
terms of this warranty are warranted for the remainder of the war-
ranty period applicable to the product to which parts are installed, 
as if parts were original components of the product.

WHAT FINN WILL DO:

Upon  notification  of  Finn  concerning  a  failure  of  material  or 
workmanship  in  accordance  with  the  above  stated Warranty,  Finn 
Corporation will:
•  Verify claim falls within the valid warranty time frame.
•  Verify the product and equipment has been 

registered

 with Finn 

in order to be eligible for warranty coverage.

•  Upon affirmation of warranty period and registration, Finn will 

send  to  you  a  new  or  repaired  replacement  part(s),  whichever 
Finn elects and a “Warranty Claim Information packet” contain-
ing instructions for processing the warranty claim.

•  Evaluate the part when defective part is returned.  Note: Failure 

to return defective part within 

two weeks

 will result in an invoice 

being  sent  to  the  customer.    In  addition,  if  damage  to  a  part  is 
determined  not  to  be  covered  under  the  warranty,  the  customer 
will be billed for the replacement part. 

•  Reconcile  costs  with  customer  for  parts  and  shipping,  as  de-

termined  by  our  inspection  of  failed  parts,  and  confirmation  of 
warranty coverage, per the terms of this warranty.

•  Correction  of  nonconformities,  in  the  manner  provided  above, 

shall  constitute  fulfillment  of  all  liabilities  of  Finn  Corporation 
under this warranty.

WHAT YOU MUST DO TO OBTAIN WARRANTY SERVICE:

•  As  the  purchaser  covered  under  the  above  limited  warranty  you 

must 

REGISTER

 the equipment with Finn as such owner.  Should 

registration  not  be  on  file  with  Finn  Corporation,  your 

warranty 

will be void

. (See Operators manual for Registration Form)

•  All warranty labor must be pre-approved by providing Finn with 

an estimate of labor costs.  Once approved, Finn will issue you a 
Work Authorization Number, prior to work being performed. 

•  The  labor  costs  reimbursement  will  be  based  on  the  Labor 

Allowance  Schedule  established  by  Finn  and  where  not  appli-
cable, on a reasonable number of hours as determined by Finn.

•  Notify Finn Corporation of any failure of material or workman-

ship as described under this warranty.

 

Web notification: [email protected]

 

Phone 1-800-543-7166 extension 246

•  Complete the required steps in the “Warranty Claim Information 

packet”  (which  Finn  will  send  you)  and  return  the  defective 
part(s) as directed in the packet to Finn Corporation.

•  Should the failed part be a hydraulic component, Finn may send 

you an “

Oil Analysis Kit

”, requesting that a sample of oil from 

the  hydraulic  system  be  taken,  and  mail  it  to  a  lab.  Follow  the 
instruction sheet, on how to use your Finn Oil Analysis Kit that 
comes with the Kit. Failure to comply when requested will void 
the warranty.

WHAT THE WARRANTY DOES NOT COVER:

  1.  Normal  wear  parts  and Allied  Equipment  or  trade  accessories 

not manufactured by it, such as but not limited to items such as 
various filters, fluids, brakes,  clutch linings, belts, hoses,  light 
bulbs,  mechanical  seal,  over  center  clutches,  tires,  ignitions, 
starters, batteries, magnetos, carburetors, engines and labor, or 
like or unlike equipment or accessories. (Such being subject to 
the warranty, if any, provided by their respective manufacture).

  2.  Secondhand, used, altered, or rebuilt machines or parts.
  3.  Defects,  malfunctions  or  failures  resulting  from  accidents, 

abuse, misuse, improper servicing, or neglect of required opera-
tional  guidelines  and  maintenance  service,  as  outlined  in  the 
Finn Corporation’s Operators Manual(s).

  4. The warranty shall be null and void to the extent any defect or 

failure  of  the  products  warranted  arises  out  of  or  is  caused  by 
accessories  or  component  parts  not  manufactured  or  supplied 
by Finn Corporation, whether same are supplied by purchaser, 
dealers, or any other party.

  5. This Warranty does 

NOT

 cover any costs associated with trans-

porting  the  equipment  for  warranty  service,  such  as  mileage, 
fuel, or man hours; such is the responsibility of the equipment 
owner.

  6.  Dealers  &  Customers  are  responsible  to  follow  all  guidelines 

related  to  Seasonal  &  Long  Term  Storage  of  Equipment,  as 
advised  in  operation  &  equipment  manuals.  i.e.  Finn,  Engine, 
Clutch, Pump, Motor, etc. Equipment failures caused by neglect 
of these guidelines are not warrantable.

THIS IS THE ONLY EXPRESS WARRANTY ON OUR PRODUCTS:

We neither assume nor authorize anyone to assume for us any other 
express warranty.  The Distributor/Dealer has no authority to make 
any representation or promise on behalf of Finn Corporation or to 
modify the terms or limitations of this warranty in any way.
THIS WARRANTY THEREFORE SHALL BE IN LIEU OF ALL 
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, 
BUT  NOT  LIMITED  TO,  ANY  IMPLIED  WARRANTY  OF 
MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR 
PURPOSE.

LIMITATIONS  ON  OUR  RESPONSIBILITY  WITH  RESPECT  TO 
PRODUCTS PURCHASED:

THE  REMEDIES  OF  THE  USER  SET  FORTH  HEREIN  ARE 
EXCLUSIVE,  WITHOUT  REGARD  TO  WHETHER  ANY 
DEFECT  WAS  DISCOVERABLE  OR  LATENT  AT  THE  TIME 
OF DELIVERY OF THE PRODUCT TO THE PURCHASER.
ALL  WARRANTY  REPAIR  MUST  BE  DONE  BY  A  FINN 
AUTHORIZED  SERVICE  PROVIDER  OR  AUTHORIZED 
REPAIR SHOP OF FINN’S CHOICE.
TRANSPORTATION,  HAULING,  STORAGE,  OR  OTHER 
SIMILAR  COSTS  ARE  NOT  PART  OF  FINN’S  OBLIGATION 
UNDER  THE  LIMITED  WARRANTIES  AND  IS  THE 
RESPONSIBILITY OF THE EQUIPMENT OWNER.
THE ESSENTIAL PURPOSE of this exclusive remedy shall be to 
provide the original purchaser with repair or replacement of parts 
that  prove  to  be  defective  within  the  period  and  under  the  condi-
tions  previously  set  forth.  This  exclusive  remedy  shall  not  have 
failed of its essential purpose (as that term is used in the Uniform 
Commercial  Code)  provided  Finn  remains  willing  to  repair  or  re-
place defective parts within a commercially reasonable time after it 
obtains actual knowledge of the existence of a particular defect.

IN NO EVENT shall Finn be liable for any special, consequential, 
incidental  or  indirect  damages,  including  lost  profits  or  lost  com-
mercial  opportunities,  with  respect  to  the  sale  of  the  above  war-
ranted  product  or  anything  done  in  connection  therewith,  or  for 
property damage sustained by a person claiming to be a third party 
beneficiary of a surviving warranty under the law of any jurisdic-
tion.

NOTICE:

FINN  CORPORATION  URGES  the  use  of  only  Finn  corporation 
supplied  parts  and  attachments  to  assure  proper  performance  and 
safe  operation  of  Finn  corporation  equipment.  Insist  on  parts  and 
attachments  manufactured  or  supplied  by  Finn  corporation  when 
you  purchase,  repair  or  replace  your  Finn  equipment  and  attach-
ments.  Because  Finn  corporation  cannot  assure  that  parts  and  at-
tachments not manufactured or supplied by Finn meet Finn corpo-
ration's quality standards, specifications, or operating requirements, 
our warranty is not effective to the extent any failure of or defect 
in  a  Finn  corporation  product  arises  from  or  is  caused  by  parts, 
attachments or components not originating with Finn corporation. 
Use of Finn corporation equipment with parts and attachments not 
manufactured or supplied by Finn could result in personal injury.

Effective August 23, 2010

Содержание T30 HydroSeeder SD


















































Отзывы:

Похожие инструкции для T30 HydroSeeder SD