Finn T30 HydroSeeder SD, Руководство по эксплуатации и каталог запасных частей

Страница: 15 / 49

10. Check and clean the nozzles and hoses of any obstructions.
11. Check pump discharge, recirculation, and remote valve handles for free movement.
VALVE OPERATION:
The base HydroSeeder® is equipped with three (3) independently operated ball valves to control slurry flow
(see Fig. 2). The first valve is the recirculation valve. An open recirculation valve allows flow back into the
tank. The second valve is the pump discharge valve. An open pump discharge valve allows slurry to flow
through the discharge hose. The third valve, located at the end of the discharge hose is the remote valve.
An open remote valve allows discharge of the slurry onto the area being covered.
WARNING: Never engage (turn on) the slurry pump clutch when the
recirculation valve and either the pump discharge or remote
valve is closed. Pump is running with slurry flow closed-off
which will result in extreme heat generation causing damage
and/or bodily injury. The recirculation valve must always be
open and material flowing back into the tank when using
the remote valve. A closed remote valve in conjunction with
a closed or plugged recirculation will cause extreme heat
resulting in damage and/or bodily injury.
RECIRCULATION
VALVE
PUMP
DISCHARGE
VALVE
REMOTE
VALVE
OPEN
OPEN
O
P
E
N
CLOSED
CLOSED
CLOSED
FIGURE 2