Fini RD 185-810, Руководство пользователя

Страница: 3 / 54

40069 Zola Predosa (BO) - ITALY
info@finicompressors.it
- EN -
Dear Customer,
thank you for choosing our product. In order to get the best performances out of this product, please read
this manual carefully.
To avoid incorrect operation of the equipment and possible physical risk to the operator, please read and
strictly follow the instructions contained in this manual.
Note, these instructions are in addition to the safety rules that apply in the country where the dryer is
installed. Before packing for shipment each
RD
series refrigerated air dryer undergoes a rigorous test to
ensure the absence of any manufacturing faults and to demonstrate that the device can perform all the
functions for which it has been designed.
Once the dryer has been properly installed according to the instructions in this manual, it will be ready for
use without any further adjustment. The operation is fully automatic, and the maintenance is limited to few
controls and some cleaning operations, as detailed in the following chapters.
This manual must be maintained available in any moment for future references and it has to be intended as
inherent part of the relevant dryer.
Due to the continuous technical evolution, we reserve the right to introduce any necessary change without
giving previous notice.
Should you experience any trouble, or for further information, please do not hesitate to contact us.
DATA NAMEPLATE
Model
Serial No.
Code
Nominal Flow Rate
Max Air Pressure
Max Inlet Air Temp.
Ambient Temp.
Refrigerant (Type and qty)
Refrig. Design Pres. HP/LP
Electric Supply
Electric Nominal Power
Fuse Max.
Manufactured
The data nameplate is located on
the back of the dryer and shows
all the primary data of the
machine. Upon installation, fill in
the table on the previous page
with all the data shown on the
data nameplate. This data should
always be referred to when
calling
the manufacturer or
distributor.
The removal or alteration of the
data nameplate will void the
warranty rights.
Model
Serial No.
Nominal Flow Rate
Max Air Pressure
Max Inlet Air Temp.
Ambient Temp.
Refrigerant
Refrig. Design Pres.
HP/LP
Electric Supply
Electric Nominal Power
Fuse Max.
Manufactured
Nl/min
barg
°C
°C
type/kg
barg
ph/V/Hz
W/A
A
www.finicompressors.com
BOLOGNA - ITALY
40069 - ZOLA PREDOSA
FINI S.p.A.
Fini
COMPRESSORS
WARRANTY CONDITIONS
For 12 months from the installation date, but no longer than 14 months from the delivery date, the warranty
covers eventual faulty parts, which will be repaired or replaced free of charge, except the travel, hotel and
restaurant expenses of our engineer.
The warranty doesn’t cover any responsibility for direct or indirect damages to persons, animals or
equipment caused by improper usage or maintenance, and it’s limited to manufacturing faults only.
The right to warranty repairs is subordinated to the strict compliance with the installation, use and
maintenance instructions contained in this manual.
The warranty will be immediately voided in case of even small changes or alterations to the dryer. To
require repairs during the warranty period, the data reported on the identification plate must be notified.