32
Display User photo
You can set the device to display a photo of the employee after a successful verification.
A success verified indicator will appear on the screen after his/her ID and name has been
verified. You can transfer photos from the software to the device.
This should be enabled if you would like the device to display the employees’ photo
on screen.
Alphanumeric User ID
You can set employee IDs with alphanumeric entry for example, ENG1003 represents
staff ID 1003 from the Engineering Department. This alphanumeric ID recommended for
large organizations with multiple departments.The person in charge will know which
department the employees belong to by referring to their ID. Only enable this if your
company intends to separate employees from different departments.
Attendance Log Alert
You can set the device to prompt an alert message on screen every time it verifies an
employee when its storage is approaching the limit. The value ranges from 1 to 99
(transaction counts). The device will always delete earlier records to free up space to
save the latest record (FIFO, first in first out), if storage is full. By default, the value is 99.
Change it if you want to apply another value.
Cyclic Delete ATT Data
You can set the device to delete a number of records when its storage is full. The value
range is from 1 to 999 records. For example, you can set the value at 500 records and the
device will delete the first 500 records to free up the space to store new records.
Cyclic Delete ATT Photo
You can set the device to delete a number of stored photos when its storage is full. The
value range is from 1 to 99. For example, you can set the value to 50 and the device will
delete the first 50 photos to free up slots to store new images.
Confirm Screen Delay(s)
You can set the time delay for the device to display verification results (ID, name and
photo). The time range is from 1s to 9s.
