Finesse VCS -F-B-10E, Руководство по эксплуатации, Страница: 14 / 55

12 /0 9 page 14
OPERATION INSTRUCTIONS
After Reset is done you can set the current time and current day (this is the difference from “Easy setting”). You need to
keep the button + press >>h<< (for setting hours), >>m<< (for setting minutes) and >>d<< for selection of weekday.
Actual selection of weekday is displayed by moving of arrow above numbers of the weekday (7 = Sunday). It is possible
to pre-set 4 different time intervals Switch ON/Switch OFF (4 ON/OFF) for the weekdays.
For entry into the program mode you have to press >>p<< . With itteration of this button you
continue to step between ON (Switch ON) and OFF (Switch OFF) in selected time interval
and other intervals also. Order of time intervals and the state Switch ON/ OFF is displayed
on the right side of the time.
PROGRAMMING
SETTING FOR
INDIVIDUAL SELECTED
DAY
DS 18
1 2 3 4 5 6 7 1 7
1
OFF
ON
If you have selected “Easy setting” at the beginning, then for selection of the time for the selected time interval press
>>h<< (for setting hours) and >>m<< (for setting minutes). But if you have selected “ ”,
then first you have to select the weekday(s) in current time interval press >>d<< , blinking
arrow will move above selected weekday. For confirmation of selection
press and arrow will stop blinking (weekday is entered). If you need the same interval for
more weekdays press >>
d << again and confirm with pressing .
After selection of weekday(s) you will continue with setting of the time for the interval.
Setting of the time is the same as in chapter (“Easy setting”). For recall of pre-set time intervals press button
>>p<< .
Attention: There are in general 4 time intervals ON/OFF for all weekdays. Each time interval can be choosen for one or
more weekdays. But it is not possible to set one of the intervals different for Monday or Saturday (interval is the same).
For example if you set the first time interval on 15:30 ON and 18:00 OFF for selected weekdays it is already reserved and
it can not be used for other days in different time (for that you have 3 more time intervals).
Recall, change or clearance
For entry into program mode and listing between time intervals press >>p<< . Change of the weekday press >>d<< and
select another day or pass already selected to cancel it. Confirm selection by pressing . If you need to clear whole time
interval, simultaneously press
>>h<< + >>m<<. Afterwards press .
Setting for individual selected day
DS 18
1 2 3 4 5 6 7 1 7
1
OFF
ON
It is used to interrupt pre-set time intervals from 1 up to 45 days. In basic state with dispaying of current time press button
>>h<< and keep it. Display shows 00. Additionally pressing you step up the days. The holiday program starts at 00:00
h of the following day and is indicated by >>H OFF<< .
After set period is gone the switch will automatically continue in pre-set intervals in
automatic mode. During holiday program you can change the length (numbers of the day)
or cancel It by setting to 00. Recall of setting holiday period press
>>h<< .in basic state with
current time.
SETTING OF HOLIDAY
PROGRAM
It is possible to control Switch ON/OFF of the switch manually. The time switch must be in basic state with current time. By
pressing you switch between ON/OFF. Keep pressing button + press step by step
>>m<< and you will change
between states “Permanently ON”, “Permanently OFF”, “Automatic mode with pre-set intervals ”.
PERMANENT CONTROL
Summer (chan 1 hour press) >>d<< + >>h<< simultaneously .
Winter (changeover - 1 hour: press) >>d<< + >>m<< simultaneously .
SUMMER / WINTER
MODE
L
1 L 2 N
M
~
N
DS 1800
1 2 3 4 5 6 7 1 7
ON
Permanently ON
DS 1800
1 2 3 4 5 6 7 1 7
OFF
Permanently OFF
DS 1800
1 2 3 4 5 6 7 1 7
OFF
Automatic mode with
pre-set intervals
DS 18
1 2 3 4 5 6 7 1 7
ON
d h m
h
1
2