14
Leaking membrane
housing
1. Threaded end cap
leaking
2. Cap or body of
housing leaking
3. O-ring not seated
properly
1. Unscrew cap, lubricate
O-ring. If leak continues,
replace
2. Check for any checks
in membrane housing or
cap. Replace if cracked
3. Make sure O-ring is in
groove and lubricated
(Membrane housing see
insert membrane on pg
10)
Cloudy/milky water
1. Defective
membrane
2. New filters or
membrane
1. Replace if TDS reading
is below 85%
2. Flush system through
Leaking fitting
1. Fitting damaged or
cracked
2. Tubing not pushed
in fitting or screw fit
not installed properly
1. Replace fitting
2. Push tubing in firmly
until it locks. Check screw
fit is installed correctly,
refer to image in
installation
