Bergrus Industrial Park, Unit 1-10, Porterville, Cape Town, 6810, South Africa
T: +27 (0)22 931 2240 E:
www.finebubbletechnologies.com
Director & Founder Paul Botha
Strictly Confidential
–
Not to be copied without written consent by Fine Bubble Technologies (Pty) Ltd. ©Copyright 2018. All rights reserved.
27
TROUBLE SHOOTING
Motor runs and stop
Over underload
switch
Insure that the
correct setting
is used for MK1
See speck on MK1
for amps setting
Motor direction wrong way
3 phases
connected
wrong on live
connection
Change the live
connections
around of 2
phases
See diagram under
8.3
No or little bubbles
Air hose is
blocked or
twisted or MK1
is hanging to
deep in pond
Insure that
there is no
bend in piping
Cable tie pipe onto
chain/ cable to
insure no bends
Ozone Nano
Bubbler™
not
going on
Electrical
connection or
timer is on
Insure that
power is on.
Set timer to on.
See attached
instruction manual
for Ozone Nano
Bubbler™
Please refer to the booklets given with instruction manual.
