Bergrus Industrial Park, Unit 1-10, Porterville, Cape Town, 6810, South Africa
T: +27 (0)22 931 2240 E:
www.finebubbletechnologies.com
Director & Founder Paul Botha
Strictly Confidential
–
Not to be copied without written consent by Fine Bubble Technologies (Pty) Ltd. ©Copyright 2018. All rights reserved.
10
Motor Rotation Direction Check
Before installing the
Nano Bubbler™
, make sure that the machine is not connected to the mains supply and
that the rotor turns freely: to so this, act on the impeller through the suction outlet.
Make sure the rotation direction is correct, i.e. clockwise looking from above of the machine (see the
arrow next on the
Nano Bubbler™
). To do this, before installation, start the motor for a few seconds
(connection and disconnection): if the rotation is correct, the
Nano Bubbler™
rebounds in a clockwise
direction. When performing this test, make sure that the machine is at a safe distance from people,
animals or property. To change the direction of rotation, switch the two phases of the supply line.
DO NOT operate the machine in dry conditions.
Start the
Nano Bubbler™
only when immersed in the liquid to
Nano Bubbler™
out; heck the minimum
suction depth on the machine installed.
NOTICE:
For continuous operation of the
Nano Bubbler™
the electric motor must be completely immersed in the
liquid.
DETERMINATION OF INSTALLATION LOCATION
Considering the volume of the object to be treated, water flow, and the purification capability of MK1
Nano Bubbler™
, number of units and locations must be determined with the help of our consultants and
authorized representatives.
Typical indications are as follows.
•
Set up the MK1 with the floating buoy/frame at centre in case of small pond.
•
Set up one or more MK1 with the floating buoy/frames at five to ten meters from bank in case of
large river and lake.
•
Set up one or more MK1 with the floating buoy/frames at upper stream when water flows.
•
In a JoJo tank set up the MK1 should be placed on the bottom and the chain tightened. Insure that
the piping is secured to the chain. Depth not more than 2.5m.
