Bergrus Industrial Park, Unit 1-10, Porterville, Cape Town, 6810, South Africa
T: +27 (0)22 931 2240 E:
www.finebubbletechnologies.com
Director & Founder Paul Botha
Strictly Confidential
–
Not to be copied without written consent by Fine Bubble Technologies (Pty) Ltd. ©Copyright 2018. All rights reserved.
6
Position and fastening
The
Nano Bubbler™
unit can be transported only horizontally. Make sure that the
Nano Bubbler™
unit is
securely fastened during transportation and cannot roll or fall over.
STORAGE GUIDELINES
The product must be stored in a covered and dry location free from heat, dirt, and vibrations.
NOTICE:
•
Protect the product against humidity, heat sources, and mechanical damage
•
Do not place heavy weights on the packed product.
•
Long term storage
If the unit is stored for more than 6 months, these requirements apply:
•
Store in a covered and dry location.
•
Store the unit free from heat, dirt, and vibrations.
•
Rotate the
Nano Bubbler™
shaft by hand several times at least every three months.
•
Treat bearings and machined surfaces so that they are well preserved.
For questions about possible long-term storage treatment services, please contact your local sales and
service representative.
Ambient temperature.
The product must be stored at an ambient temperature from -5°C to +40°C (23°F to 104°F)
SYSTEM APPLICATIONS
MK1 Ultra-
Fine Bubble (“UFB”)
Nano Bubbl
er™
is used for the treatment of polluted open water
environment - such as lakes, marshes, rivers, inlets and bays or closed water environments, as for example
waste water tanks.
The method and terms for the restoration to start self-cleaning process closely depend on the cause and
state of pollution.
The basic function and performance are described as follows.
FUNCTIONAL PRINCIPLE
By using the water pumped in from the polluted water area to be treated and surrounding air, MK1 UFB
Nano Bubbler™
produces continuously large number of “activated” air bubbles of diameter < 100 nm
(“ultra
-fine
