Fimer MVCS, Руководство по оборудованию

Страница: 6 / 50

6
1
Safety instruction
1 - Introduction to this manual
Contents of this chapter
This chapter presents the use of warnings in the manual and gives instructions for safe installation, start-up, use and
maintenance of the Medium Voltage Compact Skid “MVCS”.
Use of warnings
Warnings caution you about conditions which can result in serious injury or death and/or damage to the equipment
and advise on how to avoid the danger. The following warning symbols are used in this manual:
WARNING!
Electricity warning warns of hazards from electricity which can cause physical injury and/or damage to the
equipment.
WARNING!
General warning warns about conditions, other than those caused by electricity, which can result in physical injury
and/or damage to the equipment.
WARNING!
General warning warns about weather conditions, prohibited maintenance operations during a typhoon, thunder-
storm, snow, rain, and electrical storm. Maintenance in such conditions can result in physical injury and/or damage
to the equipment.
WARNING!
General warning warns about maintenance work on the roof which should always be done from the outer perimeter,
considering the local safety regulations.
Allowed usage
• The Medium Voltage Compact Skid “MVCS”, is designed to group the energy generated by a group of string
inverters and adapt it to the power grid. Use the MVCS only at its permissible input/output ratings and ambient
conditions. Make sure this compliance is satisfied before commissioning.
• The operation and maintenance of the MVCS must be carried out by certified technicians that fulfill all local skill
set and safety requirements. Any unqualified personnel must maintain a safe distance from the MVCS. All activi-
ties must be in accordance with the criteria described in the FIMER technical documents and local regulations.
• Make modifications to the MVCS only with authorization of FIMER. Any alterations done outside FIMER approval
will invalid the warranty for the product. FIMER is not liable for any damages caused by these changes.
• The MVCS is a non-walk-in type station, designed to be operated from the outside. Make sure the side doors are
closed at all times during operation and that no personnel is inside or in the near vicinity of the MVCS.
Safe installation, start-up and maintenance
This section contains the safety instructions which you must follow when installing, commissioning, and maintaining
the MVCS. If ignored, physical injury or death may follow, or damage may occur to the equipment.
• Only authorized electricians/personnel are allowed to install, start-up and doing maintenance on the MVCS.
Working methods, tools, components etc. must follow the IEC regulations.
• Obey all local safety regulations concerning electrical sub-stations.
• The MVCS should be energized and de-energized only by an authorized person who has the task-specific instruc-
tions for the operation of an MV substation and permission from the on-site foreperson in charge of electrical
work.
• If other people must be in the vicinity while the door is open, warn them, and if required, provide supervision and
guidance.