PERFORMANCE
TRACTION
These machines are equipped with electronically commanded traction, with
three speeds forwards and one backwards. To move the machine, it is
necessary to turn the key and then move forwards (forward movement) or
backwards (rear movement) the manipulator (1). Press the drive pedal and the
machine will start to move. The movement speed can be adjusted rotating the
selector (2).
NOTE : During reverse motion, if the switches (1 and 2) automatic-manual of
the squeegee and the tunnel are on manual position, remember to lift the
squeegee and the tunnel through the manipulator (3). During transfer, put the
switches (1 and 2) onto manual.
SQUEEGEE AUTOMATIC - MANUAL
Automatic : If the switch is placed on automatic, lowering of the squeegee
and starting of the suction motors are obtained with the machine
advancement. Also, lifting of the squeegee and stopping of the suction motors
are achieved with the reverse motion of the machine.
Manual : If the switch is placed on manual, the squeegee lifts and lowers
itself manually through the manipulator (2). The operation of the suction
motors is commanded anyhow through the squeegee movement.
BASE CYLINDRICAL BRUSH (TUNNEL) AUTOMATIC - MANUAL
Automatic : If the switch is placed on automatic, lowering of the tunnel and
starting of the cylindrical brush motor are obtained with the machine
advancement. Also, lifting of the tunnel and stopping of the motor are
achieved with the reverse motion of the machine.
Manual : If the switch is placed on manual, the tunnel lifts and lowers itself
manually through the manipulator (2). The operation of the motor is
commanded anyhow through the tunnel movement
50
