MACHINE PREPARATION
11.
ASSEMBLY CYLINDRICAL BRUSH
This operation must be carried out by a technician of the Fimap
service dept.
12.
ASSEMBLY SIDE BARS
The side bars are already secured in the front part, but they must
be put into position in the rear part. Proceed as follows:
1.
Insert the rear part of the side bar into the squeegee pin
2.
Position the retaining clip
3.
Repeat the same operations on both side bars
13.
HOPPER
Check that the hopper is closed properly, otherwise push it until
the clamping of the closing hook (1) is obtained
44
