Page 3
Translation of the original instructions with installation instructions Pi 480, Filtration Group GmbH, 24.01.19, Mat. No. 70308062, Version 02
2.4 Other symbols used
Danger: High voltage!
Danger information about explosion
protection
Information about environmental
protection
Wear protective clothing!
Eye protection must be worn!
Respirator must be worn!
Hand symbol:
Indicates general information and
recommendations
•
Bullet:
Indicates the order in which
actions are to be carried out
Arrow:
Indicates responses to actions
3
Glossary
Initial differential pressure
Differential pressure at the start of the filtration process
(when the filter element is “clean”).
Differential pressure (dP)
Pressure difference between the dirty side and the clean
side.
Wire cloth element
Filter element made of wire cloth.
Filter element
Cylindrical support structure with star-pleated filter material.
The substance to be filtered flows from the outside to the
inside. Solids are retained on the outer surface of the filter
element.
4
General information
4.1 Manufacturer
Filtration Group GmbH
Schleifbachweg 45
D-74613 Öhringen
Phone +49 7941 6466-0
Fax +49 7941 6466-429
www.industrial.filtrationgroup.com
4.2 Information about the original instructions
FG Mat. No. ......................................................... 70308062
Date: ..................................................................... 24.01.19
Version: .......................................................................... 02
4.3 Negative declaration
Our fluid filtration and automatic filter products are
designed for Group 2 fluids (not dangerous) as standard as
defined by the Article 13 of the EC Pressure Equipment
Directive. Since our filter housings have a pressure-volume
product not exceeding 10,000 bar x litres, Article 4(3)
applies, in other words a name-plate without a CE marking
is affixed to these products. No declaration of conformity
may be issued for this reason.
According to the criteria laid down in Article 2 of the
Machinery Directive 2014/34/EU, our standard hydraulic
filters are outside the scope of this directive. Under legal
provisions, therefore, we are not allowed to affix a CE
marking, nor are we permitted to issue a declaration of
incorporation or conformity.
