Fike FVA-IP, Инструкция по установке и эксплуатации

Страница: 32 / 56

Installation and Operation Manual FVA-IP Camera
28 P/N 06-523 (Rev. 6) Revision Date: June, 2019
Fig 26 – Schedule inputs
To create a zone, select the Zone button and Create Zone from the top of the zones window pane, Figure 27. You will
then be prompted, as in Figure 28, to provide:

A zone name

The type of zone (Flame, Smoke, Offsite, Motion)

The action (Block or Detect)

Sensitivity (0‐307,200)

Points (x,y,x,y)

Attach a schedule, if desired.
It is suggested that the Fike Video Analytics video management software be used to set all schedules and zones once
the system is in place and being commissioned. The zone name should be descriptive in nature and describe the
purpose of the zone. The user must define the type of zone and the action taken by the zone. Generally you will be
blocking the ability to detect fire, smoke and offsite analytics and detecting motion within a zone. The sensitivity
parameter is only applicable to a motion zone and represents the amount of pixel shift expected by the intruder (large
or small in the FOV). The points define the zone shape and size with a needed input of four points to define the x,y
pixel co‐ordinates of the square zone.
Fig 27 – Zone window pane.