Fike FVA-IP, Инструкция по установке и эксплуатации

Страница: 21 / 56

FVA-IP Camera Installation and Operation Manual
Revision Date: June, 2019 P/N 06-523 (Rev. 5) 17
3.4 Operator Features
The first feature on the operator list is the Camera Status , Figure 9. This table provides the operator the state of each
alarm and trouble condition. It also allows the operator to switch the state and turn on any of the alarm or trouble
states for testing purposes. Turning any of the states “on” results in an event file being created and recorded and any
dry contacts that are set to close on the event type would close. This feature is good for testing the camera’s
functionality or recording events that are non detectable by the analytics (i.e. fighting, theft, breach of protocol, etc.).
The override will continue until the operator returns the function to off.
Fig 9 – Camera algorithm status and override features
The Live Video feature allows for the operator to view the video feed produced by the FVA‐IP camera. The video can
be seen using the JAVA Applet or Multipart Stream (FireFox only), Figure 10.
Fig 10 – Live video though either Java Applet or Multipart Stream (FireFox only).