Fike 10-2256, Руководство по эксплуатации продукта

Страница: 30 / 49

Model 10-2256 Fire Slave Communicator Installation Manual
5-2 151086
5.1 Programming with the 10-2257 Remote Annunciator
Note: The system will automatically time out of programming mode if no keys are pressed for four minutes. If you
press function keys very quickly, you may get ahead of the LCD display. Wait for the appropriate message to
be displayed before you press .
To: Keystrokes:
Enter Programming Mode
[Installer's Code]
The first line of the LCD will show the programming option for
Step 1, "ZONE ACTIVE." The second line will show the most recently
programmed value for that option.
Program An Option
Type in your new data and then press .
Skip A Step
Press .
The data in the skipped step will not change. The LCD will show the next option.
Go To A Specific Step
Press . The first line of the LCD will show "ENTER THE STEP #" and the
current step number. Type in the new step number, then press . Line 1 of
the LCD will show the option name; line 2 will show the programmed data for the
step. (If you try to go to a step that does not exist, the display will go back to the
previous step.)
Select Yes Or No Press any digit to toggle Yes and No.
Select An Option From A Menu Press the option number. (Option numbers appear next to the option name in
Section 5.3.)
Enter Alphabetic Data Or Numbers Larger Than 9
for A or 10
for B or 11
for C or 12
for D or 13
for E or 14
Note that only the alphabetic characters appear on the display.
Correct An Error
(If you have not pressed the key.)
Press . Then type in the correct data and press .
Leave Programming Mode At Any Time
Press .
ENTER
2 7 ENTER
ENTER
ENTER
STEP
ENTER
SHIFT 1
SHIFT 2
SHIFT 3
SHIFT 4
SHIFT 5
ENTER
CLEAR ENTER
STEP STEP CLEAR CLEAR
OBSOLETE