Fike 10-2256, Руководство по эксплуатации продукта

Страница: 10 / 49

Model 10-2256 Fire Slave Communicator Installation Manual
2-2 151086
2.2 FCC Warning
2.3 UL Listings and Requirements
* From National Fire Alarm Code, 1993 Edition. Published by National Fire Protection
Association, 1 Batterymarch Park, Quincy, MA 02269-9904.
All UL installations must comply with the requirements described below. Refer to the control
unit's installation manual for complete information.
10-2256 Requirements:
1. The 10-2256 and the UL listed compatible fire control must be installed in the same room. All
wiring between the 10-2256 and the UL Listed compatible fire control panel must be enclosed
in conduit.
2. All electrical connections must comply with the ratings shown in section 3.2.4.
3. In a remote signaling installation, the control unit, slave dialer, and receiver at the remote site
must all be UL listed for remote signaling.
WARNING:
This equipment generates and uses radio frequency energy. If not installed and used in strict
accordance with this manual, it may cause harmful interference to radio communications. It has
been tested and found to comply with the limits for a Class A computing device pursuant to
Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against
such interference when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference. If this occurs, the user will be required, at his or
her own expense, to take whatever measures may be required to correct the interference.
Model Listed As:
*NFPA 72 Chapter
(for more information):
10-2256
Signaling device for use in Fire Alarm Systems for
Central Station Service. 4-3
Signaling device for use in Remote Supervising Fire
Alarm Systems. 4-5
OBSOLETE