Fiessler RAZL-2 CO, Руководство по установке

Страница: 79 / 84

l
RAZL-2 CO is set up as a skin column.
l
Shelly Relay is factory-set. On your computer or smartphone, open the Wi-Fi settings and connect
to the WiFi network created by Shelly, e.B. shelly1-35FA58.
l
Enter 192.168.33.1 in your browser's address field to load the Shelly web interface.
l
Select the WiFi Settings from the settings menu and activate the WiFi Client Mode (CM) operating
mode. Enter the WLAN data of the main column as the SSID and RAZL-2 CO password.
l
In the IP settings, select static IP and enter 10.1.10.2. If you use multiple relays, adjust the IP. The
available range is 10.1.10.2 to 10.1.10.99. Save the settings, the relay will restart automatically. If
you have problems with setting up the relay, please refer to the Shelly Relay manual.
l
Connect to the Wi-Fi RAZL-2 CO network and enter http://razl.lan in your browser's address box.
l
Activate the configuration mode by pressing the lock icon. Now, in the overview menu, switch to
the External Actuators category. Press the Add New Actuator button here. Enter the following data
in the dialog and confirm the entries with the Save button.
Name Custom name of the actuator
Event type System status changed
Event Maximum number of people reached
Url of the actuator http://10.1.10.2/relay/0?turn='CONDITION-
RESULT'
Request Header Leave unchanged
HTTP request method Get
Event Rule Send if the event type is consistent with