Fiessler RAZL-2 CO, Руководство по установке

Страница: 78 / 84

HTTP request
method Choose the required request method POST or GET. For a Shelly relay, select
GET.
HTTP Post Request
Content This field is only available with the CASE method POST. The content depends
on the device. You can use wildcards in this field.
Event Rule Select whether the actuator should only be addressed when the event type and
event have occurred, or whether the actuator should also be addressed if
another event has occurred.
Content for
{CONDITION-
RESULT} This value is used for the placeholder {CONDITION-RESULT}. For a Shelly
relay, e.g. on / off or toggle can be used here.
Content for
'CONDITION-
RESULT' with no
match to the event This field is available only if the send rule is selected as the event if the event
matches the event. This value is used for the {CONDITION-RESULT} place-
holder if the event does not match the selected event.
After all fields have been configured, press Save. The actuator is addressed with the next event. A
detailed example of the Shelly 1 relay can be found here: "Integration of a Shelly relay into a RAZL-2 CO
WLAN"Below
Editing the settings of an actuator
In the overview of the actuators, press the gear symbol of the desired actuator.
Removing an actuator
In the overview of the actuators, press the garbage bin icon of the actuator to be removed.
Integration of a Shelly relay into a RAZL-2 CO WLAN
This example uses a Shelly 1 relay as the actuator. The switching event is to reach the maximum num-
ber of people. This relay can also be ordered as an accessory directly from the Fiessler Elektronik com-
pany.