Fiessler RAZL-2 CO, Руководство по установке

Страница: 69 / 84

settings. The main column waits with its own action until no more participants are coupled. Currently
unconnected secondary columns prevent the main column from being reset. If you can no longer connect
the auxiliary column, remove the relevant column manually from the device overview. However, this aux-
iliary column can then only be reset to its original position by a voltage reset.
Factory setting of an auxiliary column
An auxiliary column can be reset in the user interface of the main column. Remove the desired device
from the device overview of the main column. The auxiliary column is then automatically set to the fact-
ory setting.
Perform factory setting by voltage reset
This process is the only option for devices to which you no longer have WLAN access. The mains
voltage must be disconnected several times in succession within a certain time window.
Connect the power plug of the device to an electrical outlet and wait until the signal light is no longer per-
manently blue. The device has completed the starting process.
Now disconnect the device from the mains voltage again within a maximum of 30 seconds and wait
about 10 seconds.
Perform the procedure a total of 3 times, but leave the unit plugged in the third time. The device now
restores the factory settings and then restarts automatically.