Fiery DocuColor 3535, Руководство по настройке, Страница: 67 / 116

5
5-9 Network Setup
TCP/IP
Specify TCP/IP settings on the Protocol1 tab. The current settings for IP address,
subnet mask, and default gateway address are displayed. For information about setting
up printing with TCP/IP, see Chapter 2.
The Fiery requires a unique, valid IP address. You can set a static address or specify that
the Fiery obtains the IP addresses automatically.
N
OTE
:
If you specify the DHCP or BOOTP protocol, the Fiery restarts when you save
your changes and exit Setup. Allow the Fiery to restart and return to Idle before
printing a Configuration page or proceeding with any other operations.
To set the subnet mask, enter one of the following values:
255.0.0.0
if the IP address starts with a number less than 128
255.255.0.0
if the IP address starts with a number from 128 through 191
255.255.255.0
if the IP address starts with a number greater than 191
N
OTE
:
Confirm the subnet mask setting with your network administrator before
proceeding. In some cases, the required setting may be different from those listed.
If your TCP/IP network has a gateway and users outside the gateway plan to print to
the Fiery using TCP/IP, enter the gateway address.
N
OTE
:
The Fiery stores assigned IP addresses, even if you later disable TCP/IP. If you
must assign the Fiery IP address to another device, first set the Fiery address to a
null address.