Fiery DocuColor 3535, Руководство по настройке

Страница: 41 / 116

2
2-17 Fiery on a network with UNIX workstations
T
O SET UP
TCP/IP
FOR COMMUNICATION WITH THE
F
IERY
1. A superuser (with root login) must add the Fiery to the network’s IP host table
(DNS table) or other system database of network printers.
2. In the file or utility used by your network, specify the remote printer name, the print
server protocol, the queue, and the spool file for the Fiery name you assigned.
3. Make the Fiery available as a printer to other network users.
4. To verify the TCP/IP connection, ping the IP address or the host name. From any
computer on the network, at the command prompt, type:
ping <IP address>
Type the Fiery IP address assigned in Fiery Network Setup.
After the Fiery is set up as a network printer, you can also ping the name you gave to
the Fiery:
ping <hostname>
The server should respond with a message such as:
Reply from <IP address> ...
Some systems will respond with a continuous display of output from the IP address.
To stop the output, type
Control-C.
You can use the
ping
command at any time.