Fieldmann FZS 1001-A, Руководство пользователя

Страница: 16 / 18

17
USER‘S MANUAL CORDLESS GRASS TRIMMEr
EN
Operation | Maintenance and storage
If the battery pack does not charge properly:
- check current at receptacle by plugging in a lamp or other appliance.
- move charger and battery pack to a location where the surrounding air temperature is
approximately 18-24°C.
- if charging problems persist, take or send the tool, battery pack and charger to your local
service center.
The battery pack should be recharged when it fails to produce sufficient power on jobs
which were easily done previously. DO NOT CONTINUE to use under these conditions. Follow
the charging procedure. You may also charge a partially used pack whenever you desire with
no adverse affect on the battery pack.
Under certain conditions, with the charger plugged in to the power supply, the exposed
charging contacts inside the charger can be shorted by foreign material. Foreign materials
of a conductive nature such as, but no limited to, steel wool, aluminum foil, or any buildup
of metallic particles should be kept away from charger cavities. Always unplug the charger
from the power supply when there is no battery pack in the cavity. Unplug charger before
attempting to clean.
Do not immerse charger in water or any other liquid.
WARNING: Don’t allow any liquid to get inside charger. Electric shock may result. To
facilitate the cooling of the battery pack after use, avoid placing the charger or battery pack in
a warm environment such as in a metal shed, or an uninsulated trailer.
WARNING: Never attempt to open the battery pack for any reason. If the plastic housing of
the battery pack breaks or cracks, return to a service center for recycling; do not put it into
further use.
8. MAINTENANCE AND STORAGE
Maintenance
After use, remove the battery pack from the trimmer.
Use only manufacturer recommended replacement parts and accessories.
To keep your line in top condition, store spare pre-wound spools or bulk line in a plastic,
sealable bag.
To clean the tool, remove battery pack and use only mild soap and a damp cloth to clean the
tool. Do not immerse tool in water or squirt it with a hose. Do not allow any liquid to get
inside it. Do not clean with a pressure washer.
The line cutter on the edge of the guard can dull over time. It is recommended you periodically
touch-up the sharpness of the blade with a file.