Fieldmann FZS 1001-A, Руководство пользователя

Страница: 13 / 18

FZS 1001-A
14
EN
Safety instructions | Assembly instructions
Use your charger only to charge batteries of the type supplied with your tool. Other batteries
could burst, causing personal injury and damage.
Only 2 battery packs are allowed to be charged continuously in order to prevent overheating
of charger, necessary rest time is required to let the charger cool down before further
charging.
When charging is finished, unplug the charger from mains socket outlet and take away the
battery pack from the charger.
Do not leave the battery pack in the charger.
Never carry the charger by its cord or pull the cord to disconnect from the socket. Keep the
cord away from heat, oil and sharp edges.
Never attempt to charge non-rechargeable batteries.
The cord of charger is not changeable, do not continue to use if the cord is damaged.
Do not expose to water or rain, do not use in wet conditions.
Do not open the charger.
Do not probe the charger.
The charger is intended for indoor use only.
6. ASSEMBLY INSTRUCTIONS
Guard installation
(see pic 2,3)
Remove two screws from the motor housing.
Slide guard over motor housing.(see pic 2)
Re-insert two screws into the guard and tighten as described in pic 3.
Attach adjustable handle
(see pic 4)
Turn the handle knob and draw out the bolt from the adjustable handle.
Insert the adjustable handle in the machine handle into the requested working position.
Insert the bolt and handle knob, then turn the handle knob lightly tighten.
Before tightening completely, turn the adjustable handle in desired angle. When adjustable
handle is in desired angle, tighten the handle knob securely.
Wheel assembly installation
(see pic 5)
Turn out the lock button from the wheel assembly.
Insert the wheel assembly into the correct position and perfect height on the motor housing.
Turn the lock button tightly.