Fieldmann FZD 5015 E, Руководство пользователя

Страница: 10 / 88

EN 10
FZD 5015 E
Assembling the shredder
6. ASSEMBLING THE SHREDDER
ATTENTION: Prior to performing any work on the machine, check that it is turned off and disconnected
from the power supply.
1. Turn the shredder unit upside down and place it
on an even fl oor.
Then lift the legs upwards. Fig 2.
2. Install the wheels as follows:
— Push the wheel axle through the holes in the
frame.
— put a washer and a wheel bushing on each
side of the axle. Fig 3.
— Put on the wheel and secure in place using
a nut. Fig 4.
— Insert a hex key through the opening in the
wheel’s axle and tighten the wheel nut. Fig 5.
— Finally put on the wheel cover.
— Repeat this procedure for both wheels.
3. Insert the collection box and lock in place using
the safety mechanism. Fig. 6, point 1
ATTENTION! The safety mechanism must be
properly locked, otherwise the machine will not
start.
Fig. 2
Fig. 3
Fig. 3.1