S.CON1M TX/FX Managed Converter
9
For optimized set-up, the S.CON1M l is equipped with an array of 7 positions DIP
switches accessible from the front panel.
The device provides extensive diagnostics and a status display with 7 high visibility
LEDs for the S.CON1M device.
Power Supply (including –48 models):
The system is equipped with a powerful power supply (100 - 240V universal input
or –48VDC), which in case of failure may be removed and replaced, without removing
the system from the rack. This minimizes Mean Time to Repair (MTTR) to 3 minutes.
A front panel LED indicates the power status
.
Management:
The S.CON1M includes on its front panel in addition to the above-mentioned
indicators and controls a “management area”. This area includes all necessary
interfaces to set-up the SNMP agent of the device (RS232 Console port and two LEDs
RCV and Ready).
The software upgrade for each S.CON1M device can be performed via the
CLI management or Telnet (from the SNMP management station)
Refer to the Management section (section 16).
CAUTION
Radiation emitted from a fiber optic
connector may be hazardous to human
vision. Therefore, the following rules
must be strictly observed
All single-mode (SM) models are
CLASS I LASER PRODUCTS
And must be handled with special care
. When not in use, keep the fiber optic
connector closed using its protective
cover.
Never stare directly into the fiber optic
connector of a powered device or into
the end of a fiber connected to it.
