S.CON1M/MA System
13
7 – Power Connection
CAUTION: When connecting a device to an AC (DC) power outlet,
always first connect the cord to the device, and ensure that it is
securely fastened. Only afterward connect the cord to the wall
outlet. Make sure to use grounded (3 way) outlets (in case of AC
models).
NEVER OPEN THE DEVICE WHEN IT IS CONNECTED TO POWER LINES!
For each country FibroLAN (or FibroLAN’s distributor) provide with the product an
appropriate power supply cord which is safety approved in accordance with related
country’s National Electric Code
Connect to AC line socket at the rear of the converter, using the included power cord. The
S.CON1M/MA will accept and automatically switch between any line voltage from 100 to 240
VAC, 50-60 Hz. There is no ON/OFF switch on the device. When the power is connected to
the device, the device is ON. This will be indicated by the POWER LED on the front panel
being illuminated.
S.CON1M/MA all AC models Rear Panel
S.CON1M/MA with 48 VDC Power Supply ( PS48 -36
÷
-
72 VDC )
Proceed as above using a suitable DC supply cable. Ensure that the polarity of the cable
complies with the polarity of the DC receptacle on the device as depicted above. There is no
ON/OFF switch
on the device. When the power is connected to the device, the unit is ON.
This will be indicated by the POWER LED being illuminated.
0V
-48VDC
