S.CON1M/MA System
10
The device provides extensive diagnostics and a status display with 7 high visibility
LEDs.
Power Supply (including –48 models):
The system is equipped with an internal overrated power supply (100 - 240V universal
input or –48VDC. A front panel LED indicates the power status.
Management
:
The S.CON1M/MA includes on its front panel in addition to the above-mentioned
indicators and controls a “management area”. This area includes all necessary
interfaces to run the CLI management (RS232 Console port and two LEDs RCV and
Ready.
S.CON1M/MA Management:
the unit can be monitored / controlled in three ways:
a.
Managing with SNMP ( Network connection: In-band management):
You can monitor/control the S.CON1M/MA media converter and the remote MA device
using SNMP management station. Ensure that the DIP switch S7 is in UP position (Disable
VLAN). If the SNMP station is connected directly to S.CON1M/MA TP port, set S7 to Down
(VLAN enable) position.
b
.
Telnet from SNMP management station:
(
statuses monitoring and MA commands
)
c
.
CLI management with a terminal (RS232 port):
(statuses monitoring and MA
commands)
You will need a terminal emulation program (such as “ Hyper Terminal)
Telnet is also supported through the RS232 port
Notes: You may download software upgrade for the S.CON1M/MA with the TFTP
routine
For a detailed description, please refer to section 16 (“
Configuring, and
managing S.CON1M/MA”
)
