manualshive.com logo in svg

FIBRO 2480.00.91.42, Руководство по эксплуатации, Страница: 38 / 76

Поделиться
Скачать
FIBRO 2480.00.91.42 Скачать руководство пользователя страница 38

38/76

Operating instructions WPM Gateway IoT

Using the WPM Gateway

Displayed limit values per sensor

Symbol

Meaning

Temperature limit values:

Temperature limit value is adhered to.

Temperature limit value has been exceeded and a warning has been trig-
gered.

Temperature limit has been exceeded and an alarm has been triggered.

Voltage limit values:

Voltage limit value is adhered to.

The voltage has fallen below the voltage limit value.

The voltage has fallen below the voltage limit values.

Pressure limit values:

The pressure limit value display takes the form of a bar graph with the ranges:
•

Red: The value has fallen below the limit value and an alarm has been triggered.

•

Yellow: The limit value has been undershot/exceeded and a warning has been triggered.
Note: The range for exceeding the limit value is only displayed if a value for the maximum 
pressure warning has been specified in the corresponding sensor configuration.

•

Green: Limit value is adhered to.

The current pressure of the sensor is displayed in colour above the bar together with a triangle, 
depending on the limit value range.

Содержание 2480.00.91.42













































































Отзывы:

Нет отзывов