6 Appendix
Copyright © Fibocom Wireless Inc.
70
7. FCC regulatory information
OEM/Integrators Installation Manual
Important Notice to OEM integrators
1. This module is limited to OEM installation ONLY.
2. This module is limited to installation in mobile or fixed applications, according to Part
2.1091(b).
3. The separate approval is required for all other operating configurations, including
portable configurations with respect to Part 2.1093 and different antenna configurations
4. For FCC Part 15.31 (h) and (k): The host manufacturer is responsible for additional
testing to verify compliance as a composite system. When testing the host device for
compliance with Part
15 Subpart B, the host manufacturer is required to show compliance with Part 15 Subpart
B while the transmitter module(s) are installed and operating. The modules should be
transmitting and the evaluation should confirm that the module's intentional emissions
are compliant (i.e. fundamental and out of band emissions). The host manufacturer must
verify that there are no additional unintentional emissions other than what is permitted in
Part 15 Subpart B or emissions are complaint with the transmitter(s) rule(s).
The Grantee will provide guidance to the host manufacturer for Part 15 B requirements if
needed.
Important Note
notice that any deviation(s) from the defined parameters of the antenna trace, as
described by the
instructions, require that the host product manufacturer must notify to Fibocom Wireless
Inc. that they wish to change
the antenna trace design. In this case, a Class II permissive change application is required
to be filed
Содержание LC116-LA
Страница 1: ...LC116 LA Hardware Guide V1 1...