manualshive.com logo in svg

FIBER FOX Mini 6S+, Руководство пользователя

Поделиться
Скачать
FIBER FOX Mini 6S+ Скачать руководство пользователя страница 48

46

Battery precautions

1.Do not touch or hit battery with pointed or sharp items.
2.Do not transport or store the battery together with metals.
3.Do not throw, drop, impact, or bend battery, or any knock or stomp on the battery 
is forbidden.
4.Do not connect the anode and cathode terminals of the battery with metals such 
as electric wire for fear of short circuit trouble.
5.Do not allow battery’s anode or cathode terminal to touch with the aluminum layer 
of package made from aluminum laminated plastic film material for fear of short-
circuit.
6.In no case the battery cell can be dismantled.
7.Do not immerse the battery into water or seawater, because the battery cell 
cannot bear moist environment.
8.Do not place or use the battery beside or near the heat source such as fire or 
heater.
9.Do not heat battery or throw it into water.
10.Do not directly solder the battery.
11.Do not charge battery near or beside the fire or in a very hot environment.
12.Do not place the battery into microwave oven or any high pressure vessel.
13.Do not allow the battery work or place it in hot temperatures such as in strong 
sunshine or hot environment in car for a long time, for fear that battery might be 
overheated, on fire, weakened functionally, or shortened in life.
14.Any usage of the damaged battery is forbidden. The battery should be kept away 
from fire source when electrolyte leakage occurs or the battery emits electrolyte 
smell for fear battery might catch on fire or explode.
15.If there is electrolyte contacting with your skin or into other part of body due to 
leakage, please rinse with water immediately. If the eye is contacted with electrolyte, 
rinse with water immediately and go to see a doctor nearest.

Содержание Mini 6S+


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды