FIBER FOX Mini 6S+, Руководство пользователя

Страница: 25 / 49

23
4.4 Parameters for Normal Splicing Process
parameter description
Template
A list of splice modes stored in the splicer database is displayed.
Upon inputting the appropriate mode, the selected splice mode
stored in database area is copied to a selected splice mode in
user-programmable area.
Name Title for a splice mode expressed in up to seven characters.
Note
Detailed explanation for a splice mode expressed in up to 15
characters. It is displayed at “Select splice mode” menu.
Focus-L Set the focus parameter for lens X.
Focus-R Set the focus parameter for lens Y.
Arc adjust Set to adjust arc power according to the fibers’ conditions.
Pull test
If “Proof test” is set to “ON”, a pull-test is performed upon opening
the windproof cover or by pressing the SET button after splicing.
Loss
estimate
Loss estimate should be regarded as a reference. Since the loss is
calculated upon the fiber image, there is certain difference with the
real value. The estimate method is based on a single mode fiber
and calculates at the wavelength of 1.31μm. The estimated value
can be a valuable reference, but cannot be used as the basis of
acceptance.
Minimum
loss
This amount is added to the estimate splice loss originally
calculated. When splicing specially or dissimilar fibers, a high actual
splice loss may occur even with optimized arc conditions. To make
the actual splice loss concur with the estimated splice loss, set the
actual splice loss to minimum value (minimum loss).
Loss Limit
An error message is displayed if the estimated splice loss exceeds
the selected threshold (loss limit).
Core angle
limit An error message is displayed if the bend angle of the two fibers
spliced exceeds the selected threshold (Core angle limit).
Cleave
angle limit An error message is displayed if the cleave angle of either the left
or right fiber ends exceed the selected threshold (cleave limit).