FIBARO SMART IMPLANT FGBS-222, Руководство по эксплуатации

Страница: 16 / 38

16
6: remoVInG from Z-WaVe netWork
6: Removing from Z-Wave network
Removing (Exclusion) – Z-Wave device learning mode, allowing to
remove the device from existing Z-Wave network. Removing also re-
sults in resetting the device to factory defaults.
To
remove the device from the Z-Wave network:
1. Power the device.
2. Set the main controller into remove mode (see the controller’s
manual).
3. Quickly, triple click button on the device housing or switch
connected to IN1 or IN2.
4. LED will start blinking yellow, wait for the removing process to
end.
5. Successful removing will be confirmed by the Z-Wave controller’s
message.
i
Removing using switch connected to IN1 or IN2 works
only if parameter 20 (IN1) or 21 (IN2) is set to 3 or 4
and parameter 40 (IN1) or 41 (IN2) does not allow sending
scenes for triple click.